Cisco Catalyst 9200 Series Hardware Installation Guide

Figure 22: Components delivered in the shipping box
(Optional) Two 19-inch mounting brackets
(RACKMNT-19-CMPCT)
*
8Cisco Catalyst 9200CX Series switch1
(Optional) Two 23-inch mounting brackets
(RCKMNT-23-CMPCT)
*
9(Optional) AC power cord
* 2
2
(Optional) Desk mount
(C9K-CMPCT-DESK-MNT)
*
10Four rubber mounting feet3
(Optional) Magnet and mounting tray
(C9K-MGNT-TRAY)
*
11(Optional) DIN rail mount
(C9K-CMPCT-DIN-MNT)
*
4
(Optional) Auxiliary Power Adapter
(C9K-ADPT-DC)
*
12(Optional) Wall mount tray
(C9K-WALL-TRAY)
*
5
(Optional) Power cord retainer
(C9K-CMPCT-PWR-CLP)
*
13(Optional) Power adapter bracket
(C9K-ADPT-BRKT-12T)
*
6
(Optional) USB Type B to RJ45 adapter
(CAB-CON-USB)
*
14(Optional) Cable guide
(C9K-CMPCT-CBLE-GRD)
*
7
2
Available to order with C9200CX-8P-2X2G and C9200CX-12P-2X2G switches. For
C9200CX-12T-2X2G, power cord is available with C9K-ADPT-DC, if ordered.
Cisco Catalyst 9200 Series Switches Hardware Installation Guide
50
Installing a Compact Switch
Shipping Box Contents

Cisco Catalyst 9200 Series Specifications

General

Category	Switch
Stacking Bandwidth	160 Gbps
Layer	Layer 2 and Layer 3
Operating System	Cisco IOS XE
Operating Temperature	0°C to 45°C (32°F to 113°F)
Series	Cisco Catalyst 9200 Series
Ports	24 or 48 Ethernet ports
Switching Capacity	Up to 176 Gbps
PoE	PoE, PoE+, and UPOE
Stacking	StackWise-160
Memory	4 GB DRAM, 4 GB Flash
Network Management	Cisco DNA Center, WebUI, CLI
Security Features	802.1X, TrustSec, MACsec
Warranty	Limited Lifetime Warranty
Dimensions	1.73 x 17.5 x 11.3 in. (4.4 x 44.5 x 28.8 cm)