Cisco Catalyst 9200 Series Hardware Installation Guide

Installing a Compact Switch 49
CHAPTER 4
Shipping Box Contents 49
Mounting the Switch 51
Mounting on a Desk or Shelf Without Mounting Screws 51
Mounting using the Mounting Tray and Screws 52
Mounting using the Mounting Tray and Magnet 55
Mounting Under a Desk or a Shelf 58
Mounting the Switch Using Rack Mount Brackets 62
Mounting the Switch on a DIN Rail 63
Connecting the System Ground 65
Attaching the Adapter Bracket to the Switch (Optional) 66
Installing the Power Cord Retainer (Optional) 69
Installing the Cable Guard (Optional) 71
Installing an SFP or SFP+ Module 73
10/100/1000 PoE and PoE+Port Connections 74
10/100/1000/Multigigabit Ethernet Port Connections 75
Auto-MDIX Connections 76
Installing a Network Module 77
CHAPTER 5
Installing a Network Module in the Switch 77
Safety Warnings 77
Installing a Network Module 78
Removing a Network Module 81
Finding the Network Module Serial Number 82
Installing and Removing Pluggable Transceiver Modules 83
Installing a Cisco Pluggable Transceiver Module 83
Removing a Cisco Pluggable Transceiver Module 85
Installing a Power Supply Unit 87
CHAPTER 6
Power Supply Modules Overview 87
Finding the Power Supply Module Serial Number 90
Installation Guidelines 91
Installing or Replacing an AC Power Supply Module 92
Cisco Catalyst 9200 Series Switches Hardware Installation Guide
v
Contents

Cisco Catalyst 9200 Series Specifications

General

Category	Switch
Stacking Bandwidth	160 Gbps
Layer	Layer 2 and Layer 3
Operating System	Cisco IOS XE
Operating Temperature	0°C to 45°C (32°F to 113°F)
Series	Cisco Catalyst 9200 Series
Ports	24 or 48 Ethernet ports
Switching Capacity	Up to 176 Gbps
PoE	PoE, PoE+, and UPOE
Stacking	StackWise-160
Memory	4 GB DRAM, 4 GB Flash
Network Management	Cisco DNA Center, WebUI, CLI
Security Features	802.1X, TrustSec, MACsec
Warranty	Limited Lifetime Warranty
Dimensions	1.73 x 17.5 x 11.3 in. (4.4 x 44.5 x 28.8 cm)