Cisco Catalyst 9200 Series Hardware Installation Guide

• Phillips screwdriver
Procedure
Step 1 Place one side of the magnet against the bottom of the mounting tray.
Figure 26: Placing the Mounting Tray on the Magnet
Magnet2Mounting tray1
Step 2 Slide the switch slightly forward after placing on to the mounting tray so that the mounting tray hooks engage
with the switch.
Cisco Catalyst 9200 Series Switches Hardware Installation Guide
56
Installing a Compact Switch
Mounting using the Mounting Tray and Magnet

Cisco Catalyst 9200 Series Specifications

General

Category	Switch
Stacking Bandwidth	160 Gbps
Layer	Layer 2 and Layer 3
Operating System	Cisco IOS XE
Operating Temperature	0°C to 45°C (32°F to 113°F)
Series	Cisco Catalyst 9200 Series
Ports	24 or 48 Ethernet ports
Switching Capacity	Up to 176 Gbps
PoE	PoE, PoE+, and UPOE
Stacking	StackWise-160
Memory	4 GB DRAM, 4 GB Flash
Network Management	Cisco DNA Center, WebUI, CLI
Security Features	802.1X, TrustSec, MACsec
Warranty	Limited Lifetime Warranty
Dimensions	1.73 x 17.5 x 11.3 in. (4.4 x 44.5 x 28.8 cm)