Cisco Firepower 1100 User Manual

When you add one of the above PIDs to your order, you can then choose a term-based subscription
corresponding with one of the following PIDs:
• L-FPR1120T-TMC-1Y
• L-FPR1120T-TMC-3Y
• L-FPR1120T-TMC-5Y
• L-FPR1140T-TMC-1Y
• L-FPR1140T-TMC-3Y
• L-FPR1140T-TMC-5Y
• L-FPR1150T-TMC-1Y
• L-FPR1150T-TMC-3Y
• L-FPR1150T-TMC-5Y
• RA VPN—See the Cisco AnyConnect Ordering Guide.
Step 2 If you have not already done so, register the FMC with the Smart Licensing server.
Registering requires you to generate a registration token in the Smart Software Manager. See the FMC
configuration guide for detailed instructions.
Register the FTD with the FMC
Register the FTD to the FMC.
Before you begin
• Gather the following information that you set in the FTD initial configuration:
• FTD management IP address or hostname, and NAT ID, if configured
• FMC registration key
Procedure
Step 1 In FMC, choose Devices > Device Management.
Step 2 From the Add drop-down list, choose Add Device, and enter the following parameters.
Cisco Firepower 1100 Getting Started Guide
98
Firepower Threat Defense Deployment with FMC
Register the FTD with the FMC

Cisco Firepower 1100 Specifications

General

Brand	Cisco
Model	Firepower 1100
Category	Firewall
Language	English