Onboard the Device Using Low-Touch Provisioning and the Serial Number,
on page 15.
Cisco Defense
Orchestrator
(CDO Admin)
(Optional) Obtain feature licenses (Configure Licensing, on page 16).Cisco Commerce
Workspace
(CDO Admin)
Generate a license token (Configure Licensing, on page 16).Smart Software
Manager
(CDO Admin)
Register the device with the Smart Licensing Server (Configure Licensing, on
page 16).
Cisco Defense
Orchestrator
(CDO Admin)
Manage the Device with CDO, on page 21.Cisco Defense
Orchestrator
(CDO Admin)
Branch Office Installation
After you receive the FTD from your corporate IT department, you need to record the firewall's serial number
and send it to the CDO administrator. Outline a communication plan for the onboarding process. Include any
key tasks to be completed and provide points of contact for each item.
Then, you need to cable and power on the firewall so that it has internet access from the outside interface.
The CDO administrator can then complete the onboarding process.
You can watch this video to see how a Branch employee onboards a firewall using CDO and low-touch
provisioning.
Tip
Provide the Firewall Serial Number to the Central Administrator
Before you rack the firewall or discard the shipping box, verify that your firewall can be deployabled using
low-touch provisioning, and record the serial number so you can coordinate with the central adminstrator.
This procedure assumes you are working with a new firewall running FTD Version 6.7 or later.
Note
Procedure
Step 1 Unpack the chassis and chassis components.
Cisco Firepower 1100 Getting Started Guide
7
Firepower Threat Defense Deployment with CDO and Low-Touch Provisioning
Branch Office Installation