• Apply Smart License: Select this option if your device is not smart licensed already. You have to generate
a token using the Cisco Smart Software Manager and copy in this field.
• Device Already Licensed: Select this option if your device has already been licensed.
If the default password has already been changed, this radio button will be selected
automatically. However, you can choose another option that you want.
Note
• Use 90-day Evaluation License: Apply a 90-day evaluation license.
Step 9 Click Next.
Step 10 In the Subscription Licenses area, perform the following:
• If the smart license is applied, you can enable the additional licenses you want and click Next.
• If the evaluation license is enabled, all other licenses are available except for the RA VPN license. Select
the licenses that you want and click Next to continue.
• You can choose to continue only with the base license.
If the Device Already Licensed is selected in the Smart License step, you cannot perform any
selection here. CDO displays Keep Existing Subscription and moves to the Labels step.
Note
Step 11 (Optional) In the Labels area, you can enter a label name if required.
Step 12 Click Go to Devices and Services.
What to do next
Communicate with the branch office where the device is being deployed. After the branch office administrator
cables and powers on the FTD, your next steps are to complete the onboarding process and configure/manage
the device.
Configure Licensing
The FTD uses Cisco Smart Software Licensing, which lets you purchase and manage a pool of licenses
centrally.
When you register the chassis, the License Authority issues an ID certificate for communication between the
chassis and the License Authority. It also assigns the chassis to the appropriate virtual account.
The Base license is included automatically. Smart Licensing does not prevent you from using product features
that you have not yet purchased. You can start using a license immediately, as long as you are registered with
the Cisco Smart Software Manager, and purchase the license later. This allows you to deploy and use a feature,
and avoid delays due to purchase order approval. See the following licenses:
• Threat—Security Intelligence and Cisco Firepower Next-Generation IPS
• Malware—Advanced Malware Protection for Networks (AMP)
• URL—URL Filtering
• RA VPN—AnyConnect Plus, AnyConnect Apex, or AnyConnect VPN Only
Cisco Firepower 1100 Getting Started Guide
16
Firepower Threat Defense Deployment with CDO and Low-Touch Provisioning
Configure Licensing
To Next Page
Loading...
Need help?
General