Cisco Firepower 1100 User Manual

firepower(local-mgmt)# shutdown
This command will shutdown the system. Continue?
Please enter 'YES' or 'NO': yes
INIT: Stopping Cisco Threat Defense......ok
Step 3 Monitor the system prompts as the firewall shuts down.
Step 4 Observe the Power LED and Status LED to verify that the chassis is powered off (appear unlit).
Step 5 After the chassis has successfully powered off, you can then turn off the power switch and unplug the power
to physically remove power from the chassis if necessary.
What's Next?
To continue configuring your FTD, see the documents available for your software version at Navigating the
Cisco Firepower Documentation.
For information related to using FDM, see Cisco Firepower Threat Defense Configuration Guide for Firepower
Device Manager.
Cisco Firepower 1100 Getting Started Guide
84
Firepower Threat Defense Deployment with FDM
What's Next?

Cisco Firepower 1100 Specifications

General

Brand	Cisco
Model	Firepower 1100
Category	Firewall
Language	English