Cisco IE-3000-8TC Message Guide

2-78
Cisco IE 3000 Switch System Message Guide
OL-13020-01
Chapter 2 Message and Recovery Procedures
VQPCLIENT Messages
Error Message VQPCLIENT-7-NEXTSERV: Trying next VMPS [IP_address].
Explanation The system has lost connectivity with the current VMPS and is changing to the next
server in its list. [IP_address] is the address of the next server in the list.
Recommended Action This is a debug message only. No action is required.
Error Message VQPCLIENT-7-PROBE: Probing primary server [IP_address].
Explanation The system is trying to reestablish connectivity with the primary VMPS at the given IP
address.
Recommended Action This is a debug message only. No action is required.
Error Message VQPCLIENT-7-RECONF: Reconfirming VMPS responses.
Explanation The switch is reconfirming all responses with the VMPS.
Recommended Action This is a debug message only. No action is required.

Cisco IE-3000-8TC Specifications

General

Switching Capacity	16 Gbps
MAC Address Table Size	8000
Uplink Ports	2 x 10/100/1000Base-T or SFP (Small Form-Factor Pluggable)
Operating Temperature	-40°C to 70°C
Mounting	DIN rail
Ports	8 x Ethernet 10/100Base-TX ports
Jumbo Frame Support	Yes