Cisco MDS 9000 Series Troubleshooting Guide

Send comments to mdsfeedback-doc@cisco.com.
5-30
Cisco MDS 9000 Family Troubleshooting Guide
OL-5183-02, Cisco MDS SAN-OS Release 1.3
Chapter 5 Troubleshooting IP Storage Issues
Troubleshooting FCIP Connections
Jan 14 15:14:37 port1: 855356:FCIP21: processing SF frame, I'm Responder
Jan 14 15:14:37 port1: 855357:FCIP21: Source FC fabric name in SF (0x20000005300059de)
does not match LEP's peer fabric WWN (0x20010005300059df)
Jan 14 15:14:37 port1: 855358:FCIP21: Delete the DE [1]0xd802cac0
Jan 14 15:14:37 port1: 855359:FCIP21: Set lep operation state to DOWN
Jan 14 15:14:37 port1: 855360:FCIP21: DE [-670905664] 0x00000001 terminate tcp connection
0xd8071400
Jan 14 15:14:37 port1: 855361:FCIP21: Delete the DE object [1] 0xd802cac0
Figure 5-10 shows a trace of an incorrect remote switch WWN using a Special Frame
Figure 5-10 Trace of Incorrect Remote Switch WWN Using a Special Frame

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available