Cisco MDS 9000 Series Troubleshooting Guide

Send comments to mdsfeedback-doc@cisco.com.
6-60
Cisco MDS 9000 Family Troubleshooting Guide
OL-5183-02, Cisco MDS SAN-OS Release 1.3
Chapter 6 Troubleshooting the Fabric
Configuring an OUI
Note The number in the lower left corner of the screen increments as the device locator attempts to
discover the devices in your network fabric. When the discovery process is complete, the number
indicates the number of rows displayed.
Configuring an OUI
When two WWNs in different VSANs on the same fabric have the same IP address, you will need to
specify an Organizationally Unique Identifier (OUI) that Fabric Manager can use to differentiate the
WWNs. If Fabric Manager encounters this situation, a dialog is displayed. Enter the OUI in the
appropriate fields in the dialog. Restart Fabric Manager for your changes to take effect.
Note This situation does not affect the availability or the functionality of the switch and/or fabric.

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available