Cisco MDS 9700 Series User Manual

aborting migration...
<Tue Apr 30 10:02:47 2019> ERROR!!! Running System version: <running_version>, version of
system image provided :
<Supervisor- 3_image_version>
<Tue Apr 30 10:02:47 2019> ERROR!!! Version of system image provided ('<sup3_image_version>’)
does not match running version,
aborting migration...
Solution Check the image version. The release versions of the Supervisor-4 Module kickstart and system
images provided should be the same as the existing Supervisor-1 Module kickstart and system images.
Problem Unable to retrieve the chassis information. The following syslog message is displayed:
<Tue Apr 30 10:02:47 2019> ERROR!!! Chassis information retrieve failed, aborting
migration...
Solution Use the migrate sup kickstart < supervisor4-kickstart-image > system < supervisor4-system-image
> command again.
Problem Unable to retrieve the slot number of the supervisor module. The following syslog message is displayed:
<Tue Apr 30 10:02:47 2019> ERROR!!! Supervisor slot information retrieve failed, aborting
migration...
Solution Use the migrate sup kickstart < supervisor4-kickstart-image > system < supervisor4-system-image
> command again.
Problem Unable to retrieve the slot number of the standby supervisor module. The following syslog message
is displayed:
<Tue Apr 30 10:02:47 2019> ERROR!!! Standby Supervisor slot information retrieve failed,
aborting migration...
Solution Use the migrate sup kickstart < supervisor4-kickstart-image > system < supervisor4-system-image
> command again.
Problem In case the migrate sup kickstart < supervisor4-kickstart-ima g e > system < supervisor4-system-imag e
> command cannot read the stored Supervisor-1 Module image links, the migration process fails. The following
syslog messages are displayed:
<Tue Apr 30 10:02:47 2019> ERROR!!! Kickstart image link for Active
Supervisor-1 (DS-X97-SF1-K9) could not be found, aborting migration...
<Tue Apr 30 10:02:47 2019> Please set the boot parameters using 'boot kickstart
<kickstart_image>' and 'boot system <system_image>'
<Tue Apr 30 10:02:47 2019> ERROR!!! System image link for Active Supervisor-1
(DS-X97-SF1-K9) could not be found, aborting migration...
<Tue Apr 30 10:02:47 2019> Please set the boot parameters using 'boot kickstart
<kickstart_image>' and 'boot system <system_image>'
Solution Set the Supervisor-1 Module image links using the boot kickstart < kickstart_image > command
and the boot system < system_image > command before re-inserting the standby Supervisor-4 Module.
Problem The Supervisor-4 Module is already present in the standby slot before initiating the migration procedure.
The following syslog message is displayed:
<Tue Apr 30 10:02:47 2019> ERROR!!! Supervisor-4 is already inserted in
standby slot <slot_number> before starting migration. Please remove Standby supervisor
and start single Supervisor migration, aborting migration...
Solution Remove the standby Supervisor-4 Module and start the migration process again.
Problem The standby Supervisor-1 Module is not in the HA-standby state. The following syslog message is
displayed:
<Tue Apr 30 10:02:47 2019> ERROR!!! Standby Supervisor-3 (DS-X97-SF1-K9)
is not yet in ha-standby state, aborting migration...
Cisco MDS 9700 Series Switches Hardware Installation Guide
146
Installing, Removing, and Verifying Field Replaceable Units
Troubleshooting

Cisco MDS 9700 Series Specifications

General

Brand	Cisco
Model	MDS 9700 Series
Category	Switch
Language	English