Verification:
PE1:
PE1# show l2vpn discovery xconnect
Service Type: VPWS, Connected
List of VPNs (1 VPNs):
XC Group: gr1, MP2MP mp1
List of Local Edges (1 Edges):
Local Edge ID: 1, Label Blocks (1 Blocks)
Label base Offset Size Time Created
---------- ------ ---- -------------------
16030 1 10 01/24/2009 21:23:04
Status Vector: 9f ff
List of Remote Edges (1 Edges):
Remote Edge ID: 2, NLRIs (1 NLRIs)
Label base Offset Size Peer ID Time Created
---------- ------ ---- --------------- -------------------
16045 1 10 1.1.1.1 01/24/2009 21:29:35
Status Vector: 7f ff
PE1# show l2vpn xconnect mp2mp detail
Group gr1, MP2MP mp1, state: up
VPN ID: 100
VPN MTU: 1500
L2 Encapsulation: VLAN
Auto Discovery: BGP, state is Advertised (Service Connected)
Route Distinguisher: (auto) 3.3.3.3:32770
Import Route Targets:
2.2.2.2:100
Export Route Targets:
2.2.2.2:100
Signaling protocol:BGP
CE Range:10
….
Group gr1, XC mp1.1:2, state is up; Interworking none
Local CE ID: 1, Remote CE ID: 2, Discovery State: Advertised
AC: GigabitEthernet0/1/0/1.1, state is up
Type VLAN; Num Ranges: 1
BGP Configuration Guide for Cisco NCS 5500 Series Routers, IOS XR Release 6.2.x
157
BGP-based VPWS Autodiscovery
VPWS with BGP Autodiscovery and BGP Signaling
To Next Page
Loading...
