EasyManua.ls Logo

Cisco NCS 5500 Series - Page 168

Cisco NCS 5500 Series
172 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
VLAN ranges: [1, 1]
MTU 1500; XC ID 0x2000013; interworking none
PW: neighbor 1.1.1.1, PW ID 65538, state is up ( established )
PW class not set, XC ID 0x2000013
Encapsulation MPLS, Auto-discovered (BGP), protocol BGP
MPLS Local Remote
------------ ------------------------------ -----------------------------
Label 16031 16045
MTU 1500 1500
Control word enabled enabled
PW type Ethernet VLAN Ethernet VLAN
CE-ID 1 2
------------ ------------------------------ -----------------------------
...
PE1# show bgp l2vpn vpws
BGP router identifier 3.3.3.3, local AS number 100
BGP generic scan interval 60 secs
BGP table state: Active
Table ID: 0x0
BGP main routing table version 913
BGP NSR converge version 3
BGP NSR converged
BGP scan interval 60 secs
Status codes: s suppressed, d damped, h history, * valid, > best
i - internal, S stale
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Rcvd Label Local Label
Route Distinguisher: 1.1.1.1:32775
*>i2:1/32 1.1.1.1 16045 nolabel
*>i3:1/32 1.1.1.1 16060 nolabel
Route Distinguisher: 3.3.3.3:32770 (default for vrf gr1:mp1)
*> 1:1/32 0.0.0.0 nolabel 16030
*>i2:1/32 1.1.1.1 16045 nolabel
*>i3:1/32 1.1.1.1 16060 nolabel
Processed 5 prefixes, 5 paths
BGP Configuration Guide for Cisco NCS 5500 Series Routers, IOS XR Release 6.2.x
158
BGP-based VPWS Autodiscovery
VPWS with BGP Autodiscovery and BGP Signaling

Table of Contents

Other manuals for Cisco NCS 5500 Series

Related product manuals