Figure 61: Attaching the Right Door Stopper
Screw holes on the right side of the cable
management frame.
3Right door stopper identified with an R on the bottom of the base.1
Two M3x10 screws that fasten the stopper to the right side of the
cable management frame.
2
Step 3 Position the hinge bracket (700-28491-01) at the bottom of the cable management frame and the chassis as shown in
Figure 62: Positioning the Hinge Bracket to the Cable Management Frame and Chassis, on page 118.
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
117
Installing a Cisco Nexus 7018 Chassis
Installing the Front Door and Air Intake Frame
To Next Page
Loading...
