Figure 64: Fastening Ball-Point Studs to the Air Intake Area
Ball-headed
stud
1
Step 8 Align the air intake frame to the four ball-point studs and press the frame onto the chassis as shown in Figure 65:
Positioning the Air Intake Frame on the Chassis, on page 121. The captive screws on the air-intake frame should align
with their screw holes in the chassis.
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
120
Installing a Cisco Nexus 7018 Chassis
Installing the Front Door and Air Intake Frame
To Next Page
Loading...
