Figure 3: Standard Hardware Features on the Rear of a Cisco Nexus 7009 Chassis
Power supplies (1 or 2)—these modules are a
combination of the following:
• 6 kW AC power supply (N7K-AC-6.0KW)
• 7.5 kW AC power supply
(N7K-AC-7.5KW-INT [international
plugs])(N7K-AC-7.5KW-US [US plugs])
• 6 kW DC power supply (N7K-DC-6.0KW)
• Blank filler plate (installed in place of a
missing power supply to maintain the
designed airflow)
2Fan tray (1)1
Figure 2: Standard Hardware Features on the Front and Sides of the Cisco Nexus 7009 Chassis, on page 5
and Figure 3: Standard Hardware Features on the Rear of a Cisco Nexus 7009 Chassis, on page 6 show the
Cisco Nexus 7009 chassis as it appears when it is fully configured before including cables for management
and network connections. The systems that are not fully configured with the maximum number of supervisor
modules, I/O modules, fabric modules, or power supplies have blank panels installed in place of the missing
components to maintain the designed airflow for system cooling.
Note
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
6
Overview
Cisco Nexus 7009 Switch
To Next Page
Loading...
