Cisco Nexus 7004 - Page 23

Fabric modules (up to 5) [N7K-C7010-FAB-1 or
N7K-C7010-FAB-2])
4Fan exhaust for the supervisor and I/O modules1
Power supply units (up to 3) and exhaust for the
power supply units—these modules are a
combination of the following:
• 6 kW AC power supply (N7K-AC-6.0KW)
• 7.5 kW AC power supply
(N7K-AC-7.5KW-INT [international plugs]
and N7K-AC-7.5KW-US [US plugs])
• 6 kW DC power supply (N7K-DC-6.0KW)
• Blank filler plate (replaces a missing power
supply to maintain the designed airflow)
5System fan trays (2) (N7K-C7010-FAN-S) and
exhaust for the supervisor and I/O modules
2
Fabric fan trays (2) (N7K-C7010-FAN-F) and
exhaust for the fabric modules
3
Figure 4: Standard Hardware Features on the Front and Sides of the Cisco Nexus 7010 Chassis, on page 9
and Figure 1-6 show the Cisco Nexus 7000 Series chassis as it appears when it is fully configured before
including cables for connections to the Internet and the console. The systems that are not fully configured
with the maximum number of supervisor modules, I/O modules, fabric modules, or power supplies have blank
filler panels installed in place of the missing components to maintain the designed airflow for system cooling.
Note
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
11
Overview
Cisco Nexus 7010 System