◦
36-port 40-Gigabit Ethernet QSFP+ aggregation (non-blocking) line card (N9K-X9636PQ)
(supported by the Cisco Nexus 9504 and 9508 only)
◦
36-port 40-Gigabit Ethernet QSFP+ line card (N9K-X9536PQ)
◦
48-port 1/10-Gigabit Ethernet SFP+ and 4-port 40-Gigabit Ethernet QSFP+ line card
(N9K-X9464PX)
◦
48-port 1/10GBASE-T and 4-port 10/40-Gigabit Ethernet QSFP+ line card (N9K-X9464TX)
◦
48-port 1/10GBASE-T and 4-port 10/40-Gigabit Ethernet QSFP+ line card (N9K-X9464TX2)
◦
48-port 1/10-Gigabit Ethernet SFP+ and 4-port 40-Gigabit Ethernet QSFP+ line card
(N9K-X9564PX)
◦
48-port 1/10GBASE-T and 4-port 10/40-Gigabit Ethernet QSFP+ line card (N9K-X9564TX)
◦
-EX line cards supported by the N9K-C9508-FM-E fabric modules:
◦
32-port 40/100-Gigabit Ethernet QSFP28 line card (N9K-X9732C-EX)
◦
48-port 1/10/25-Gigabit Ethernet SFP28 and 4-port 40/100-Gigabit Ethernet QSFP28 line card
(N9K-X97160YC-EX)
◦
-R line cards supported by the N9K-C9508-FM-R fabric modules:
◦
36-port 100-Gigabit Ethernet QSFP28 line card (N9K-X9636C-RX) with TCAM
◦
36-port 100-Gigabit Ethernet QSFP28 line card (N9K-X9636C-R)
◦
36-port 40-Gigabit Ethernet QSFP+ line card (N9K-X9636Q-R)
◦
-S line cards supported by the N9K-C9508-FM-S fabric modules:
◦
32-port 100-Gigabit Ethernet QSFP28 line card (N9K-X9432C-S)
◦ Fabric modules—See the following table for quantity and type (the switch must have only one type of fabric
module).
Cisco Nexus 9508 NX-OS Mode Switch Hardware Installation Guide
21
Installing a Chassis
Inspecting the New Switch
To Next Page
Loading...
