Name: Cisco RV082 - Small Business VPN Router
Brand: Cisco
Rating: 4 (1 reviews)

To Next Page

To Previous Page

VPN

Introduction to VPNs

Cisco Small Business RV0xx Series Routers Administration Guide 124

You will need to configure this router with the specific IPsec policies required for

the IPsec client. You also will need to install and configure the IPsec client

software on the users’ computers.

NOTE Consider two other remote access options: Remote Access with Cisco

QuickVPN, page 125 and Remote Access with PPTP, page 125.

The following is an example of a client-to-gateway VPN. A business traveler

connects to the Internet from her hotel room. Her notebook computer has VPN

client software that is configured with her office’s VPN settings. She accesses the

VPN client software and connects to the VPN router at the central office. Using the

VPN, she now has a secure connection to the central office’s network, as if she

were physically connected.

Configuration tasks:

1. Use the VPN > Client to Gateway page to configure the VPN tunnel with the

settings required by the third-party client, such as TheGreenbow. For

instructions, see Setting Up a Remote Access Tunnel for VPN Clients (Client

To Gateway), page 139.

2. Install the client software on the users’ computers.

199469

Outside

209.165.200.226

DNS Server

WINS Server

192.168.1.30

Personal Computer

Using VPN Software Client

Personal Computer

Using VPN Software Client

Personal Computer

Using VPN Software Client

Inside

192.168.1.1

RV0xx

router

Internet

Internal

network

Questions and Answers:

Need help?

Do you have a question about the Cisco RV082 - Small Business VPN Router and is the answer not in the manual?

Cisco RV082 - Small Business VPN Router Specifications

General