VPN
Setting Up a Remote Access Tunnel for VPN Clients (Client To Gateway)
Cisco Small Business RV0xx Series Routers Administration Guide 139
9
Setting Up a Remote Access Tunnel for VPN Clients (Client To
Gateway)
Use VPN > Client To Gateway page to create a new VPN tunnel to allow
teleworkers and business travelers to access to your network by using third-party
VPN client software, such as TheGreenBow.
NOTE For information about third-party clients, see application notes by visiting
www.cisco.com/go/smallbizrouters (see the Technical Documentation section).
To open this page: Click VPN > Client to Gateway in the navigation tree.
Alternatively, you can click the Add Tunnel button on the VPN > Summary page, in
the Tunnel Status section. Then choose Client to Gateway.
199469
Outside
209.165.200.226
DNS Server
WINS Server
192.168.1.30
Personal Computer
Using VPN Software Client
Personal Computer
Using VPN Software Client
Personal Computer
Using VPN Software Client
Inside
192.168.1.1
RV0xx
router
Internet
Internal
network