Cisco RV082 - Small Business VPN Router User Manual

6
Cisco Small Business RV0xx Series Routers Administration Guide 95
Port Management
Use the Port Management module to configure port settings and view the port
status.
• Configuring the Port Settings, page 95
• Viewing the Status Information for a Port, page 97
Configuring the Port Settings
The default port settings should be sufficient for most small businesses, but you
can use the Port Management > Port Setup page to customize these settings if
needed. You can disable a port or customize its priority, speed, duplex mode, and
auto-negotiation settings. You also can enable port-based VLANs to control traffic
between devices on your network.
To open this page: Click Port Management > Port Setup in the navigation tree.
NOTE Before navigating away from this page, click Save to save your settings, or click
Cancel to undo them. Any unsaved changes are abandoned.

Cisco RV082 - Small Business VPN Router Specifications

General

VPN Tunnels	50
DHCP Server	Yes
Authentication	MD5, SHA1
Power Supply	12V DC, 1A
Humidity	10% to 85% non-condensing
LAN Ports	8 x 10/100 Mbps RJ-45
VPN Protocols	IPSec, PPTP, L2TP
Firewall	SPI
Encryption	DES, 3DES, AES
Memory	8 MB Flash, 32 MB DRAM
Operating Temperature	0 to 40°C
Storage Temperature	-4 to 158°F (-20 to 70°C)
Weight	0.69 kg