EasyManuals Logo

Cisco RV082 - Small Business VPN Router User Manual

Cisco RV082 - Small Business VPN Router
199 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #27 background imageLoading...
Page #27 background image
Setup
Setting Up the Network
Cisco Small Business RV0xx Series Routers Administration Guide 27
3
Setting Up the Network
Use the Setup > Network page to set up your LAN, WAN (Internet connections),
and DMZ interface.
To open this page: Click Setup > Network in the navigation tree.
NOTE Before navigating away from this page, click Save to save your settings, or click
Cancel to undo them. Any unsaved changes are abandoned.
This page includes the following sections:
Host Name and Domain Name, page 27
LAN Setting (device IP address and subnets), page 28
WAN Setting (Internet connection), page 31
DMZ Setting, page 32
Host Name and Domain Name
Some ISPs require that you assign a host name and domain name to identify your
router on the ISP network. Default values are provided, but you can change them if
needed.
Host Name: Keep the default setting or enter a host name specified by your
ISP.
Domain Name: Keep the default setting or enter a domain name specified
by your ISP.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco RV082 - Small Business VPN Router and is the answer not in the manual?

Cisco RV082 - Small Business VPN Router Specifications

General IconGeneral
VPN Tunnels50
DHCP ServerYes
AuthenticationMD5, SHA1
Power Supply12V DC, 1A
Humidity10% to 85% non-condensing
LAN Ports8 x 10/100 Mbps RJ-45
VPN ProtocolsIPSec, PPTP, L2TP
FirewallSPI
EncryptionDES, 3DES, AES
Memory8 MB Flash, 32 MB DRAM
Operating Temperature0 to 40°C
Storage Temperature-4 to 158°F (-20 to 70°C)
Weight0.69 kg

Related product manuals