Cisco RV082 - Small Business VPN Router User Manual

Backing Up and Restoring the Settings
Cisco Small Business RV0xx Series Routers Administration Guide 92
5
Backing Up and Restoring the Settings
Use the System Management > Backup and Restore page to import, export, and
copy your configuration files. The router has two configuration files: the startup
and the mirror. The Startup file is the configuration file that the router loads when it
boots up. The router automatically copies the startup file to the mirror. Thus, the
Mirror file contains the last known valid configuration. In the future, if the Startup
configuration file fails for any reason, then the Mirror configuration file is used.
NOTE The router automatically copies the startup configuration to the mirror configuration
after 24 hours of running in stable condition (no reboot and no configuration
changes within a 24-hour period).
To open this page: Click System Management > Backup and Restore in the
navigation tree.
You can perform the following tasks:
• Restoring the Settings from a Configuration File, page 92
• Backing Up Configuration Files and Mirror Files, page 93
• Copying a Startup File or Mirror File, page 93
Restoring the Settings from a Configuration File
If you want to revert to previously saved settings, you can import a configuration
file.

Cisco RV082 - Small Business VPN Router Specifications

General

VPN Tunnels	50
DHCP Server	Yes
Authentication	MD5, SHA1
Power Supply	12V DC, 1A
Humidity	10% to 85% non-condensing
LAN Ports	8 x 10/100 Mbps RJ-45
VPN Protocols	IPSec, PPTP, L2TP
Firewall	SPI
Encryption	DES, 3DES, AES
Memory	8 MB Flash, 32 MB DRAM
Operating Temperature	0 to 40°C
Storage Temperature	-4 to 158°F (-20 to 70°C)
Weight	0.69 kg