Name: Cisco RV082 - Small Business VPN Router
Brand: Cisco
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Using Built-In Diagnostic Tools

Cisco Small Business RV0xx Series Routers Administration Guide 87

Using Built-In Diagnostic Tools

Use the System Management > Diagnostic page to access two built-in tools, DNS

Name Lookup and Ping. If you suspect a problem with connectivity, you can use

these tools to investigate.

To open this page: Click System Management > Diagnostic.

Choose DNS Name Lookup if you know a DNS name and want to learn the IP

address. Choose Ping to test the connectivity to a particular IP address on the

Internet.

DNS Name Lookup

Choose this option to test connectivity to the DNS server that you specified on the

Setup > Network page, or to look up an IP address that you want to use in the Ping

test.

In the Look up the name field, enter a host name, such as www.cisco.com. Do not

include a prefix such as http://. Then click Go. If the test is successful, the IP

address of the host appears.

NOTE This tool requires that the router can connect to a valid DNS server, based on the

WAN interface settings (

Setup > Network

page).

Questions and Answers:

Need help?

Do you have a question about the Cisco RV082 - Small Business VPN Router and is the answer not in the manual?

Cisco RV082 - Small Business VPN Router Specifications

General