Setup
Setting Up Universal Plug and Play (UPnP)
Cisco Small Business RV0xx Series Routers Administration Guide 48
3
• To delete an entry from the list: Click the entry that you want to delete, and
then click Delete. To select a block of entries, click the first entry, hold down
the Shift key, and then click the final entry in the block. To select individual
entries, press the Ctrl key while clicking each entry. To de-select an entry,
press the Ctrl key while clicking the entry.
• To view the port range table: Click View, near the bottom of the page.
Choose Port Range Forwarding or Port Triggering. To update the display,
click Refresh. To return to the Forwarding page, click Close.
Setting Up Universal Plug and Play (UPnP)
Use the Setup > UPnP page to enable Universal Plug and Play (UPnP). This feature
allows Windows to automatically configure the router to open and close ports for
Internet applications such as gaming and videoconferencing.
To open this page: Click Setup > UPnP in the navigation tree.
NOTE
• As a security precaution, disable UPnP unless you require it for your
applications.
• Before navigating away from this page, click Save to save your settings, or
click Cancel to undo them. Any unsaved changes are abandoned.
To Next Page
Loading...
Need help?
General
