Name: Cisco RV082 - Small Business VPN Router
Brand: Cisco
Rating: 4 (1 reviews)

To Next Page

To Previous Page

VPN

Setting Up a Remote Access Tunnel for VPN Clients (Client To Gateway)

Cisco Small Business RV0xx Series Routers Administration Guide 142

If you know the IP address of the remote VPN client, choose IP Address,

and then enter the address. If you do not know the IP address of the remote

VPN client, select IP by DNS Resolved, and then enter the real domain

name of the client on the Internet. The router will get the IP address of

remote VPN client by DNS Resolved, and the IP address of remote VPN

client will be displayed in the VPN Status section of the Summary page.

• IP + Email Address (USER FQDN) Authentication: Choose this option if

this client has a static IP address and you want to use any email address for

authentication. The current WAN IP address appears automatically. Enter

any Email Address to use for authentication.

If you know the IP address of the remote VPN client, choose IP Address,

and then enter the address. If you do not know the IP address of the remote

VPN client, select IP by DNS Resolved, and then enter the real domain

name of the client on the Internet. Cisco RV082 will get the IP address of

remote VPN client by DNS Resolved, and IP address of remote VPN device

will be displayed in the VPN Status section of the Summary page.

• Dynamic IP + Domain Name (FQDN) Authentication: Choose this option if

this client has a dynamic IP address and a registered Dynamic DNS

hostname (available from providers such as DynDNS.com). Enter the

Domain Name to use for authentication. The domain name can be used only

for one tunnel connection.

• Dynamic IP + E-mail Addr.(USER FQDN) Authentication: Choose this

option if this client has a dynamic IP address and does not have a Dynamic

DNS hostname. Enter any Email Address to use for authentication.

Remote Client Setup for a Group (“Group VPN” Type)

Specify the method for identifying the clients to establish the VPN tunnel. The

following options are available for a Group VPN.

• Domain Name (FQDN) Authentication: Choose this option to identify the

client by a registered domain name. Also enter a Domain Name to use for

authentication. The domain name can only be used only for one tunnel

connection.

• Email Address (USER FQDN) Authentication: Choose this option to

identify the client by an email address for authentication. Enter the address

in the fields provided.

• Microsoft XP/2000 VPN Client: Choose this option if the client software is

the built-in Microsoft XP/2000 VPN Client.

Questions and Answers:

Need help?

Do you have a question about the Cisco RV082 - Small Business VPN Router and is the answer not in the manual?

Cisco RV082 - Small Business VPN Router Specifications

General