VPN
Setting Up PPTP Server
Cisco Small Business RV0xx Series Routers Administration Guide 151
9
user launches the client and logs in with the user name and password that you
configured. For more information, users should refer to the Windows
documentation or Help files.
To open this page: Click VPN > PPTP Server in the navigation tree.
NOTE Before navigating away from this page, click Save to save your settings, or click
Cancel to undo them. Any unsaved changes are abandoned.
Check the Enable PPTP Server box to allow PPTP VPN tunnels. Uncheck the box
to disable this feature. It is disabled by default. After you check the box, additional
fields appear.
IP Address Range
Enter the range of LAN address to assign to the PPTP VPN clients. Enter the first
address in the Range Start field, and enter the final address in the Range End
field. The default range is 192.168.1.200 to 92.168.1.204.
NOTE The LAN IP address range for PPTP VPN clients should be outside of the normal
DHCP range of the router.
PPTP Server
Add or edit the list of PPTP VPN users.
• To add a user to the list: Enter the following information, and then click Add
to list.
- Username: Enter a name for this user.
- New Password: Enter a password.
- Confirm New Password: Re-enter the password to confirm.
To Next Page
Loading...
Need help?
General
