Name: Cisco RV082 - Small Business VPN Router
Brand: Cisco
Rating: 4 (1 reviews)

To Next Page

To Previous Page

IPSec NAT Traversal

Overview

Cisco Small Business RV0xx Series Routers Administration Guide 185

Configuration of Router B

Follow these instructions for Router B.

STEP 1 Launch the web browser for a networked computer, designated PC 2.

STEP 2 Access the configuration utility of Router B.

STEP 3 Click VPN > Gateway to Gateway in the navigation tree.

STEP 4 Enter a name in the

Tunnel Name

field.

STEP 5 For the VPN Tunnel setting, select Enable.

STEP 6 For the Local Security Gateway Type, select IP Only. The WAN IP address of

Router B will be automatically detected.

For the Local Security Group Type, select Subnet. Enter Router B’s local network

settings in the

IP Address

and

Subnet Mask

fields.

STEP 7 For the Remote Security Gateway Type, select IP Only. Enter the WAN IP address

of the NAT 2 router in the

IP Address

field.

STEP 8 For the Remote Security Group Type, select Subnet. Enter Router A’s local

network settings in the

IP Address

and

Subnet Mask

fields.

STEP 9 In the IPSec Setup section, select the appropriate encryption, authentication, and

other key management settings.

STEP 10 In the

Preshared Key

field, enter a string for this key, for example, 13572468.

STEP 11 Click Advanced Settings.

STEP 12 Check the NAT Traversal box to enable this feature.

STEP 13 Click Save.

Questions and Answers:

Need help?

Do you have a question about the Cisco RV082 - Small Business VPN Router and is the answer not in the manual?

Cisco RV082 - Small Business VPN Router Specifications

General