Introduction
Features of the User Interface
Cisco Small Business RV0xx Series Routers Administration Guide 19
1
Pop-Up Windows
Some links and buttons launch pop-up windows that display more information or
related configuration pages. If your web browser displays a warning message
about the pop-up window, allow the blocked content.
Setup Wizards
Two setup wizards make it easy to set up your Internet connection and/or DMZ
and to configure access rules for the WAN, LAN, and DMZ. You can use these
wizards or use the other pages of the configuration utility.
To open the Wizard page: Click the Setup Wizard button in the Configuration
section of the System Summary page. Alternatively, click Wizard in the navigation
tree. There are two wizards:
• Basic Setup: Click Launch Now to configure the basic settings for your
Internet connection and DMZ. Follow the on-screen instructions.
• Access Rule Setup: Click Launch Now to configure access rules for the
WAN, LAN, and DMZ. Follow the on-screen instructions.
Saving the Settings
Your settings on a configuration page are not saved until you click the Save button.
When you navigate to another page, any unsaved settings are abandoned.
To clear the settings without saving them, you can click the Cancel button.
Help
To view more information about the selected configuration page, click the Help link
near the top right corner of the configuration utility. If your web browser displays a
warning message about the pop-up window, allow the blocked content.
Logout
To exit the configuration utility, click the Logout link near the top right corner of the
configuration utility. The Login page appears. You can close the browser window.
To Next Page
Loading...
Need help?
General
