Cisco RV082 - Small Business VPN Router User Manual

Specifications
Cisco RV082
Cisco Small Business RV0xx Series Routers Administration Guide 195
G
Protocol Binding Protocols can be bound to particular WAN port under
load balancing
DHCP DHCP Server, DHCP Client, DHCP Relay
DNS DNS Proxy, Dynamic DNS (DynDNS, 3322)
NAT Many-to-One, One-to-One
DMZ DMZ port, DMZ host
Routing Static and RIP v1, v2
QoS
Port-based QoS Configurable per LAN port
Service based QoS Supports rate control or priority
Rate Control Upstream/downstream bandwidth can be configured
per service
Priority Each service can be mapped to one of the 3 priority
levels
VPN
IPSec 100 IPSec tunnels for branch office connectivity
QuickVPN 50 QuickVPN users for remote client access
PPTP Built-in PPTP server supporting 5 PPTP clients
Encryption DES, 3DES, AES-128, AES-192, AES-256
Authentication MD5, SHA1
IKE Support Internet Key Exchange
IPSec NAT-T Supported for gateway-to-gateway and client-to-
gateway tunnels
Advanced Options DPD, Split DNS, VPN Backup
VPN Passthrough PPTP, L2TP, IPSec
Management
Web-Based HTTPS
SNMP Supports SNMP v1 and v2c

Cisco RV082 - Small Business VPN Router Specifications

General

VPN Tunnels	50
DHCP Server	Yes
Authentication	MD5, SHA1
Power Supply	12V DC, 1A
Humidity	10% to 85% non-condensing
LAN Ports	8 x 10/100 Mbps RJ-45
VPN Protocols	IPSec, PPTP, L2TP
Firewall	SPI
Encryption	DES, 3DES, AES
Memory	8 MB Flash, 32 MB DRAM
Operating Temperature	0 to 40°C
Storage Temperature	-4 to 158°F (-20 to 70°C)
Weight	0.69 kg