Cisco RV320 User Manual

10
Cisco RV320/RV325 Administration Guide 107
Log
Logs document the status of the system, either by using traps or periodically.
System Log
Configure Short Message Service (SMS) logs and alerts.
Configuring the System Log Send SMS
To configure the link for the log, complete the following:
STEP 1 Click Enable.
STEP 2 Select USB1 or USB2 to send the log out the USB ports.
STEP 3 Check the Dial Number1 and/or Dial Number2 and enter the phone number to
call.
STEP 4 Click Test to test the link.
STEP 5 Select when the log is sent:
• When a link is brought up.
• When a link is brought down.
• Authentication fails.
• The system is started.
STEP 6 Click Save.
Configuring the System Log Servers
To enable a server, click Enable and enter the name of the Syslog Server.

Cisco RV320 Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet interface type	Gigabit Ethernet
USB version	2.0
USB ports quantity	2
Ethernet LAN (RJ-45) ports	6
Gigabit Ethernet (copper) ports quantity	4
Routing protocols	RIP-1, RIP-2
Supported network protocols	IPv4, IPv6, Static IP, PPPoE, PPTP, DNS, DynDNS
VPN support	IPsec, L2TP, DPD, DNS
Firewall security	Port Address Translation (PAT) firewall, Stateful packet inspection (SPI) firewall, Network address translation (NAT) firewall
Security algorithms	128-bit AES, 192-bit AES, 256-bit AES, 3DES, DES, HTTPS, MD5, SHA-1, SSL/TLS
VPN tunnels quantity	25
Authentication method	SHA-1, MD5
MAC address filtering	-
Certification	FCC, CE, UL, cUL, CB, CCC, BSMI, KC, Anatel
Storage temperature (T-T)	0 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 85 %
Product color	Black
Rack mounting	No
LED indicators	Activity, LAN, Link, Power, USB, WAN
Input current	1.5 A
Output voltage	12 V

Weight and Dimensions

Depth	44 mm
Width	206 mm
Height	132 mm
Weight	- g