3
Cisco RV320/RV325 Administration Guide 17
Setup
Use the Setup > Network page to set up your LAN, WAN (Internet), DMZ, and so
forth.
Setup Network
Some ISPs require that you assign a hostname and domain name to identify your
device. Default values are provided, but they can be changed as needed:
• Host Name—Keep the default setting or enter a hostname specified by
your ISP.
• Domain Name—Keep the default setting or enter a domain name specified
by your ISP.
IP Mode
Choose the type of addressing to use on the networks:
• IPv4 Only—Only IPv4 addressing.
• Dual-Stack IP—IPv4 and IPv6 addressing. After saving the parameters,
you can configure both IPv4 and IPv6 addresses for the LAN, WAN, and
DMZ networks.
To Next Page
Loading...
