Cisco RV320 - User Management; Local Data Base; Radius (PAP, CHAP, MSCHAP, MSCHAPv2); Active Directory

13
Cisco RV320/RV325 Administration Guide 119
User Management
User management controls domain and user access, primarily used for PPTP,
Cisco VPN Client (also known as EasyVPN), and SSL VPN.
To add (or modify) a domain:
STEP 1 Click Add (or select an entry and click Edit).
STEP 2 Choose the Authentication Type and enter the required information:
• Local Data Base—Authenticates to a local database.
- Domain—Domain name users select to log into the SSL VPN portal.
• Radius (PAP, CHAP, MSCHAP, MSCHAPv2)—Authenticates to a RADIUS
server by using Password Authentication Protocol (PAP), Challenge
Handshake Authentication Protocol (CHAP), Microsoft Challenge
Handshake Authentication Protocol (MSCHAP), or Microsoft Challenge
Handshake Authentication Protocol Version 2 (MSCHAPv2).
- Domain—Domain name users select to log into the SSL VPN portal.
- Radius Server—IP address of the RADIUS server.
- Radius Password—Authentication secret.
• Active Directory—Windows Active Directory authentication. Note that
Active Directory authentication is the most error prone. If you are unable to
authenticate by using Active Directory, read the troubleshooting procedure
at the end of this section.
- Domain—Domain name users select to log into the SSL VPN portal.
- AD Server Address—IPv4 address of the Active Directory server.
- AD Domain Name—Domain name of the Active Directory server.
• LDAP—Lightweight Directory Access Protocol.
- Domain—Domain name users select to log into the SSL VPN portal.