User Management
120 Cisco RV320/RV325 Administration Guide
13
- LDAP Server Address—IPv4 address of the LDAP server.
- LDAP Base DN—Search base for LDAP queries. An example of a search
base string is CN=Users,DC=yourdomain,DC=com.
STEP 3 Click OK.
To add (or modify) a user, click Add (or select an entry and click Edit) and enter the
following information:
• Username—Name the user enters to log into the SSL VPN portal.
• Password—Password used for authentication.
• Group—Groups sourced from the SSL Status Table in Group Management.
By default, the Group drop-down has 5 options; 4 default SSLVPN groups
and Unassigned. The Unassigned group contains PPTP VPN users and
EasyVPN users. The Administrator group has only one user, the default
username of the Administrator group is cisco.
• Domain—Name of the domain listed in the Domain Management table.
To Next Page
Loading...
