EasyManuals Logo
Home>Cisco>Network Router>RV320

Cisco RV320 User Manual

Cisco RV320
122 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #39 background imageLoading...
Page #39 background image
Setup
MAC Address Cloning
Cisco RV320/RV325 Administration Guide 39
3
To enable this feature, check Enable.
To add an entry to the list, click Add and enter the following information:
Private Range Begin—Starting IP address of the internal IP address range
that you want to map to the public range. Do not include the router
management IP address in this range.
Public Range Begin—Starting IP address of the public IP address range
provided by the ISP. Do not include the router WAN IP address in this range.
Range Length—Number of IP addresses in the range. The range length
cannot exceed the number of valid IP addresses. To map a single address,
enter 1.
To modify an entry, check the entry that you want to modify and click Edit. The
information appears in the text fields. Make the changes and click Save.
MAC Address Cloning
Some ISPs require that you register a MAC address (the unique 12-digit
identification code assigned to every network device). If you previously registered
a different MAC address for the device with your ISP, you can select this feature to
clone that address to your device. Otherwise, you must contact your ISP to
change the registered MAC address.
NOTE When MAC Address Clone is enabled, port mirroring does not work.
To clone a MAC address:
STEP 1 Click the Interface radio button.
STEP 2 Click Edit to display the Edit MAC Address Clone page.
User Defined WAN MAC Address—Click the radio button and enter the 12
digits of the MAC address that you registered with your ISP.
MAC Address from this PC—Click to use the MAC address of your
computer as the clone MAC address for the device.
STEP 3 Click Save.

Table of Contents

Other manuals for Cisco RV320

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco RV320 and is the answer not in the manual?

Cisco RV320 Specifications

General IconGeneral
Ethernet LANYes
Cabling technology10/100/1000Base-T(X)
Networking standardsIEEE 802.3, IEEE 802.3u
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet interface typeGigabit Ethernet
USB version2.0
USB ports quantity2
Ethernet LAN (RJ-45) ports6
Gigabit Ethernet (copper) ports quantity4
Routing protocolsRIP-1, RIP-2
Supported network protocolsIPv4, IPv6, Static IP, PPPoE, PPTP, DNS, DynDNS
VPN supportIPsec, L2TP, DPD, DNS
Firewall securityPort Address Translation (PAT) firewall, Stateful packet inspection (SPI) firewall, Network address translation (NAT) firewall
Security algorithms128-bit AES, 192-bit AES, 256-bit AES, 3DES, DES, HTTPS, MD5, SHA-1, SSL/TLS
VPN tunnels quantity25
Authentication methodSHA-1, MD5
MAC address filtering-
CertificationFCC, CE, UL, cUL, CB, CCC, BSMI, KC, Anatel
Storage temperature (T-T)0 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 85 %
Product colorBlack
Rack mountingNo
LED indicatorsActivity, LAN, Link, Power, USB, WAN
Input current1.5 A
Output voltage12 V
Weight and Dimensions IconWeight and Dimensions
Depth44 mm
Width206 mm
Height132 mm
Weight- g

Related product manuals