Cisco RV320 - Port Status

Port Management
Port Status
70 Cisco RV320/RV325 Administration Guide
6
• EEE—Check this box to enable Energy-Efficient Ethernet that reduces the
consumption of power during periods of low data activity.
• Priority—For each port, select the appropriate priority level, High or
Normal. This ensures Quality of Service (QoS) by prioritizing the traffic for
devices on particular ports. For example, you might assign High priority to a
port that is used for gaming or video conferences. The default setting is
Normal.
• Mode—Port speed and duplex mode. When Auto Negotiation is selected,
the device auto-negotiates connection speeds and duplex mode with the
connected device.
Port Status
Port status displays a summary of the port states. Click Refresh to update the
data.
The Ethernet table displays the following:
• Port ID—Location of the port.
• Type—Port type.
• Link Status—Status of the connection.
• Port Activity—Status of the port.
• Priority—Port priority set in the Port Setup window.
• Speed Status—Speed of the port, 10 Mbps or 100 Mbps or 1000 Mbps.
• Duplex Status—Duplex mode, Half or Full.
• Auto negotiation—Status of the duplex mode.
Traffic Statistics
For the selected port, the Statistics table displays the following:
• Port ID—Location of the port.
• Link Status—Status of the connection.