EasyManuals Logo
Home>Cisco>Network Router>RV320

Cisco RV320 User Manual

Cisco RV320
122 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #85 background imageLoading...
Page #85 background image
VPN
Gateway to Gateway
Cisco RV320/RV325 Administration Guide 85
8
- Dynamic IP + E-mail Addr.(USER FQDN) Authentication—This router
has a dynamic IP address and does not have a Dynamic DNS hostname.
Enter an Email Address to use for authentication.
If both routers have dynamic IP addresses (as with PPPoE connections),
do not choose Dynamic IP + Email Addr. for both gateways. For the
remote gateway, choose IP Address and IP Address by DNS Resolved.
Keying Mode = IKE with Certificate
Local Security Gateway Type—LAN resources that can use this tunnel.
The only option is IP + Certificate.
- IP Address—Displays the WAN IP address of the device.
Local Certificate—Certificates available in the Certificate Management >
My Certificate window. Select the certificate from the drop-down menu.
Self-Generator displays the Certificate Generator window.
Import Certificate displays the My Certificate window.
Local Security Group Type—Allows selection of a single IP address, a
Subnet, or an IP (address) Range within a subnet.
- IP Address—Specify one device that can use this tunnel. Enter the IP
Address of the device.
- Subnet—Allow all devices on a subnet to use the VPN tunnel. Enter the
subnetwork IP Address and Subnet Mask.
- Begin IP and End IP (IP Range)—A range of devices that can use the
VPN tunnel. Enter the first IP address in Begin IP and the end IP address
in End IP.

Table of Contents

Other manuals for Cisco RV320

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco RV320 and is the answer not in the manual?

Cisco RV320 Specifications

General IconGeneral
Ethernet LANYes
Cabling technology10/100/1000Base-T(X)
Networking standardsIEEE 802.3, IEEE 802.3u
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet interface typeGigabit Ethernet
USB version2.0
USB ports quantity2
Ethernet LAN (RJ-45) ports6
Gigabit Ethernet (copper) ports quantity4
Routing protocolsRIP-1, RIP-2
Supported network protocolsIPv4, IPv6, Static IP, PPPoE, PPTP, DNS, DynDNS
VPN supportIPsec, L2TP, DPD, DNS
Firewall securityPort Address Translation (PAT) firewall, Stateful packet inspection (SPI) firewall, Network address translation (NAT) firewall
Security algorithms128-bit AES, 192-bit AES, 256-bit AES, 3DES, DES, HTTPS, MD5, SHA-1, SSL/TLS
VPN tunnels quantity25
Authentication methodSHA-1, MD5
MAC address filtering-
CertificationFCC, CE, UL, cUL, CB, CCC, BSMI, KC, Anatel
Storage temperature (T-T)0 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 85 %
Product colorBlack
Rack mountingNo
LED indicatorsActivity, LAN, Link, Power, USB, WAN
Input current1.5 A
Output voltage12 V
Weight and Dimensions IconWeight and Dimensions
Depth44 mm
Width206 mm
Height132 mm
Weight- g

Related product manuals