Cisco SG220-26P Administration Guide

SNMP
Configuring SNMP Notification Recipients
Cisco 220 Series Smart Switches Administration Guide Release 1.1.0.x 286
19
NOTE The Security Level here will depend on which User Name was
selected. If the User Name was configured as No Authentication, the
Security Level will be No Authentication only. However, if the User Name has
assigned Authentication and Privacy on the Users page, the security level on
this screen can be either No Authentication, or Authentication, or Privacy.
STEP 4 Click Apply. The SNMPv3 notification recipient is defined, and the Running
Configuration is updated.

Cisco SG220-26P Specifications

General

Model	SG220-26P
Ports	26
PoE Ports	24
Switching Capacity	52 Gbps
Forwarding Rate	38.69 Mpps
Layer	Layer 2
Power Supply	Internal
VLANs Supported	256
Management	Web-based GUI, SNMP
Operating Temperature	0°C to 40°C
Storage Temperature	-4°F to 158°F (-20°C to 70°C)
Operating Humidity	10% to 90% non-condensing
Storage Humidity	5% to 95% non-condensing
Dimensions	440 x 44 x 257 mm
Weight	3.3 kg