Cisco SG220-26P Administration Guide

Cisco 220 Series Smart Switches Administration Guide Release 1.1.0.x 4
Contents
To configure Loopback Detection: 113
Configuring Link Aggregation 114
Load Balancing 114
LAG Management 115
Static and Dynamic LAG Workflow 116
Configuring LAG Management 116
Configuring LAG Settings 117
Configuring LACP 119
Configuring Energy Efficient Ethernet 121
Chapter 10: Power over Ethernet 123
PoE Considerations 123
PoE on the Switch 124
Configuring PoE Properties 126
Configuring PoE Port Settings 128
Chapter 11: Managing VLANs 131
VLANs 131
Configuring Default VLAN 133
Creating VLANs 134
Configuring Interface’s VLAN Settings 135
Configuring Port to VLAN 137
Viewing VLAN Membership 138
Configuring GVRP 140
Configuring Voice VLAN 141
Configuring Voice VLAN Properties 143
Configuring Telephony OUI 143
Adding Interfaces to Voice VLAN on Basis of OUIs 145
Chapter 12: Spanning Tree Protocol 147
STP Modes 147

Cisco SG220-26P Specifications

General

Model	SG220-26P
Ports	26
PoE Ports	24
Switching Capacity	52 Gbps
Forwarding Rate	38.69 Mpps
Layer	Layer 2
Power Supply	Internal
VLANs Supported	256
Management	Web-based GUI, SNMP
Operating Temperature	0°C to 40°C
Storage Temperature	-4°F to 158°F (-20°C to 70°C)
Operating Humidity	10% to 90% non-condensing
Storage Humidity	5% to 95% non-condensing
Dimensions	440 x 44 x 257 mm
Weight	3.3 kg