Cisco SG220-26P Administration Guide

Cisco 220 Series Smart Switches Administration Guide Release 1.1.0.x 5
Contents
Configuring STP Status and Global Settings 148
Configuring STP Interface Settings 150
Configuring RSTP Interface Settings 151
Configuring Multiple Spanning Tree 153
Configuring MSTP Properties 154
Mapping VLANs to MST Instance 155
Configuring MSTP Instance Settings 156
Configuring MSTP Interface Settings 156
Chapter 13: MAC Address Tables 159
Types of MAC Addresses 159
Configuring Static MAC Addresses 160
Configuring Static MAC Address Filter 161
Configuring Dynamic MAC Address Aging Time 161
Querying Dynamic MAC Addresses 162
Configuring Reserved MAC Addresses 163
Chapter 14: Multicast Forwarding 164
Multicast Forwarding 164
Configuring Multicast Properties 167
Configuring IP Multicast Group Addresses 168
Configuring IGMP Snooping 169
Configuring MLD Snooping 171
Querying IGMP/MLD IP Multicast Groups 173
Configuring Multicast Router Ports 174
Configuring Forward All Multicast 175
Configuring Maximum IGMP and MLD Groups 176
Configuring Multicast Filtering 176
Configuring Multicast Filter Profiles 177
Configuring Interface Filter Settings 177

Cisco SG220-26P Specifications

General

Model	SG220-26P
Ports	26
PoE Ports	24
Switching Capacity	52 Gbps
Forwarding Rate	38.69 Mpps
Layer	Layer 2
Power Supply	Internal
VLANs Supported	256
Management	Web-based GUI, SNMP
Operating Temperature	0°C to 40°C
Storage Temperature	-4°F to 158°F (-20°C to 70°C)
Operating Humidity	10% to 90% non-condensing
Storage Humidity	5% to 95% non-condensing
Dimensions	440 x 44 x 257 mm
Weight	3.3 kg