Cisco TelePresence DX70 - Macros Commands; Xcommand Macros Log Clear; Xcommand Macros Log Get; Xcommand Macros Macro Activate

D15363.05 Cisco TelePresence DX70 and DX80 API Reference Guide CE9.2, NOVEMBER 2017.
Copyright © 2017 Cisco Systems, Inc. All rights reserved. 108
Cisco TelePresence DX70 and DX80
API Reference Guide
Macros commands
xCommand Macros Log Clear
Clears the Macros Logs.
Requires user role: ADMIN
USAGE:
xCommand Macros Log Clear
xCommand Macros Log Get
Shows the logs for all running macros and for the runtime itself.
Requires user role: ADMIN
USAGE:
xCommand Macros Log Get [Offset: "Offset"]
where
Offset : String (0..65534)
Shows lines with the same or higher Offset than the one provided. The default is set to
0.
xCommand Macros Macro Activate
Activates a macro created on this video system.
Requires user role: ADMIN
USAGE:
xCommand Macros Macro Activate Na m e: "Name"
where
Name : String (0..255)
Specifies the name of the macro to activate.
xCommand Macros Macro Deactivate
Deactivates a macro currently running on this video system.
Requires user role: ADMIN
USAGE:
xCommand Macros Macro Deactivate Na m e: "Name"
where
Name : String (0..255)
The name of the macro to deactivate.
xCommand Macros Macro Get
Shows the details of a macro created on this video system.
Requires user role: ADMIN
USAGE:
xCommand Macros Macro Get [Content: Content] [Na m e: "Name"]
where
Content : Literal (False / True)
Shows the content for the specified Macro or not. The default is set to false
Name : String (0..255)
The name of the macro.
xCommand Macros Macro Remove
Removes a macro created on this video system.
Requires user role: ADMIN
USAGE:
xCommand Macros Macro Remove Na me: "Name"
where
Name : String (0..255)
The name of the macro that is removed.
Introduction
About the API
xConfiguration
Appendices
xCommand
xSt atus

xCommand