Cisco TelePresence DX70 - Xstatus Audio Output Connectors Line [N] Connectionstatus; Xstatus Audio Selecteddevice; Xstatus Audio Volume; Xstatus Audio Volumehandsetusb

D15363.05 Cisco TelePresence DX70 and DX80 API Reference Guide CE9.2, NOVEMBER 2017.
Copyright © 2017 Cisco Systems, Inc. All rights reserved. 148
Cisco TelePresence DX70 and DX80
API Reference Guide
xStatus Audio Output Connectors Line [n] ConnectionStatus
Shows whether the audio output line is connected.
Requires user role: ADMIN, INTEGRATOR, USER
Value space of the result returned:
Connected / NotConnected / Unknown
Example:
xStatus Audio Output Connectors Line 1 ConnectionStatus
*s Audio Output Connectors Line 1 ConnectionStatus: Connected
** end
xStatus Audio SelectedDevice
Shows the audio device that is selected. Only the DX70 supports analog headsets.
Requires user role: ADMIN, USER
Example:
xStatus Audio SelectedDevice
*s Audio SelectedDevice: Internal
** end
xStatus Audio Volume
Shows the volume level (dB) of the loudspeaker output.
Requires user role: ADMIN, INTEGRATOR, USER
Value space of the result returned:
0..10 0
Example:
xStatus Audio Volume
*s Audio Volume: 70
** end
xStatus Audio VolumeHandsetUsb
Shows the volume level of the USB handset.
Requires user role: ADMIN, USER
Value space of the result returned:
Integer
Example:
xStatus Audio VolumeHandsetUsb
*s 6
** end
xStatus Audio VolumeHeadsetAnalog
Shows the volume level of the analog headset (DX70 only).
Requires user role: ADMIN, USER
Value space of the result returned:
Integer
Example:
xStatus Audio VolumeHeadsetAnalog
*s 6
** end
xStatus Audio VolumeHeadsetUsb
Shows the volume level of the USB headset.
Requires user role: ADMIN, USER
Value space of the result returned:
Integer
Example:
xStatus Audio VolumeHeadsetUsb
*s 6
** end
Introduction
About the API
xConfiguration
Appendices
xCommand
xSt atus

xSt atus