Cisco TelePresence DX70 - Xcommand Macros Macro Rename; Xcommand Macros Macro Roles Set; Xcommand Macros Macro Save; Xcommand Macros Runtime Restart

D15363.05 Cisco TelePresence DX70 and DX80 API Reference Guide CE9.2, NOVEMBER 2017.
Copyright © 2017 Cisco Systems, Inc. All rights reserved. 109
Cisco TelePresence DX70 and DX80
API Reference Guide
xCommand Macros Macro Rename
Renames a macro created on this video system.
Requires user role: ADMIN
USAGE:
xCommand Macros Macro Rename Na me: "Name" NewNa me: "NewName" [Over w rite:
Over write]
where
Name : String (0..255)
The name of the macro that is renamed.
NewName : String (0..255)
The new name of the macro.
Over write : Literal (False / True)
Overwrites the existing content or not. The default is set to false.
xCommand Macros Macro Roles Set
Sets the role for a macro.
Requires user role: ADMIN
USAGE:
xCommand Macros Macro Roles Set Na m e: "Name" [Role: "Role"]
where
Name : String (0..255)
The name of the macro that is set.
Role : String (0..255)
The name of the role that is set.
xCommand Macros Macro Save
Saves the details of a macro. This is a multiline command.
Requires user role: ADMIN
USAGE:
xCommand Macros Macro Save Na m e: "Name" [O ver w rite: Overwrite]
where
Name : String (0..255)
The name of the macro that is saved.
Over write : Literal (False / True)
Overwrites the existing content or not. The default is set to true.
xCommand Macros Runtime Restart
Restarts all of the macros set up on this device.
Requires user role: ADMIN
USAGE:
xCommand Macros Runtime Restart
xCommand Macros Runtime Start
Starts all of the macros set up on this device.
Requires user role: ADMIN
USAGE:
xCommand Macros Runtime Start
xCommand Macros Runtime Status
Shows the current status of the macros runtime on this device.
Requires user role: ADMIN
USAGE:
xCommand Macros Runtime Status
Introduction
About the API
xConfiguration
Appendices
xCommand
xSt atus

xCommand