Cisco TelePresence DX70 - Peripherals Status; Xstatus Peripherals Connecteddevice [N] Hardwareinfo; Xstatus Peripherals Connecteddevice [N] ID; Xstatus Peripherals Connecteddevice [N] Name

D15363.05 Cisco TelePresence DX70 and DX80 API Reference Guide CE9.2, NOVEMBER 2017.
Copyright © 2017 Cisco Systems, Inc. All rights reserved. 173
Cisco TelePresence DX70 and DX80
API Reference Guide
Peripherals status
xStatus Peripherals ConnectedDevice [n] HardwareInfo
Shows hardware information about connected device.
Requires user role: ADMIN, INTEGRATOR, USER, ROOMCONTROL
Value space of the result returned:
String
Example:
xStatus Peripherals ConnectedDevice 1007 HardwareInfo
*s Peripherals ConnectedDevice 1007 HardwareInfo: "1122330-0"
** end
xStatus Peripherals ConnectedDevice [n] ID
Shows the MAC-address of the connected device.
Requires user role: ADMIN, INTEGRATOR, USER, ROOMCONTROL
Value space of the result returned:
String
Example:
xStatus Peripherals ConnectedDevice 1007 ID
*s Peripherals ConnectedDevice 1007 ID: "00:10:20:20:be:21"
** end
xStatus Peripherals ConnectedDevice [n] Name
Shows the product name of connected device.
Requires user role: ADMIN, INTEGRATOR, USER, ROOMCONTROL
Value space of the result returned:
String
Example:
xStatus Peripherals ConnectedDevice 1007 Name
*s Peripherals ConnectedDevice 1007 Name: "Cisco TelePresence Touch"
** end
xStatus Peripherals ConnectedDevice [n] SoftwareInfo
Shows information of the software version running on the connected device.
Requires user role: ADMIN, INTEGRATOR, USER, ROOMCONTROL
Value space of the result returned:
String
Example:
xStatus Peripherals ConnectedDevice 1007 SoftwareInfo
*s Peripherals ConnectedDevice 1007 SoftwareInfo: "TI7.2.0"
** end
xStatus Peripherals ConnectedDevice [n] Status
Shows peripheral devices that are currently connected to the endpoint.
Requires user role: ADMIN, INTEGRATOR, USER, ROOMCONTROL
Value space of the result returned:
Connected/ResponseTimedOut
Example:
xStatus Peripherals ConnectedDevice 1001 Status
*s Peripherals ConnectedDevice 1001 Status: Connected
** end
xStatus Peripherals ConnectedDevice [n] Type
Shows the peripheral types that are connected to the endpoint.
Note: The value space Camera only shows Precision 60 cameras.
Requires user role: ADMIN, INTEGRATOR, USER, ROOMCONTROL
Value space of the result returned:
Byod/Camera/ControlSystem/ISDNLink/Other/SpeakerTrack/TouchPanel
Example:
xStatus Peripherals ConnectedDevice 1001 Type
*s Peripherals ConnectedDevice 1001 Type: TouchPanel
** end
Introduction
About the API
xConfiguration
Appendices
xCommand
xSt atus

xSt atus