Cisco TelePresence DX70 Reference Guide

D15363.05 Cisco TelePresence DX70 and DX80 API Reference Guide CE9.2, NOVEMBER 2017.
Copyright © 2017 Cisco Systems, Inc. All rights reserved. 154
Cisco TelePresence DX70 and DX80
API Reference Guide
xStatus Cameras Camera [n] SoftwareID
Shows the software identity of the camera.
Requires user role: ADMIN, INTEGRATOR, USER, ROOMCONTROL
Value space of the result returned:
String
Example:
xStatus Cameras Camera 1 SoftwareID
*s Camera 1 SoftwareID: "S01718-4.0FINAL [ID:40063] 2014-10-20"
** end
Capabilities status
xStatus Capabilities Conference MaxActiveCalls
Shows the the maximum number of simultaneous active calls. Calls that are set on hold/transfer
are not counted as active.
Requires user role: ADMIN, USER
Value space of the result returned:
0..5
Example:
xStatus Capabilities Conference MaxNumberOfActiveCalls
*s Capabilities Conference MaxNumberOfActiveCalls: 3
** end
xStatus Capabilities Conference MaxAudioCalls
Shows the the maximum number of simultaneous audio calls that is supported.
Requires user role: ADMIN, USER
Value space of the result returned:
Integer
Example:
xStatus Capabilities Conference MaxAudioCalls
*s Capabilities Conference MaxAudioCalls: 3
** end
xStatus Capabilities Conference MaxCalls
Shows the the maximum number of simultaneous calls.
Requires user role: ADMIN, USER
Value space of the result returned:
0..5
Example:
xStatus Capabilities Conference MaxCalls
*s Capabilities Conference MaxCalls: 3
** end
Introduction
About the API
xConfiguration
Appendices
xCommand
xSt atus

xSt atus

Cisco TelePresence DX70 Specifications

General

Brand	Cisco
Model	TelePresence DX70
Category	Conference System
Language	English