Cisco TelePresence DX70 - Xstatus Provisioning Status; Proximity Status; Xstatus Proximity Services Availability

D15363.05 Cisco TelePresence DX70 and DX80 API Reference Guide CE9.2, NOVEMBER 2017.
Copyright © 2017 Cisco Systems, Inc. All rights reserved. 177
Cisco TelePresence DX70 and DX80
API Reference Guide
xStatus Provisioning Status
Shows the status of the provisioning.
Failed: The provisioning failed.
AuthenticationFailed: The authentication failed.
Provisioned: The endpoint is provisioned.
Idle: The provisioning is not active.
NeedConfig: The endpoint needs to be configured.
ConfigError: An error occurred during configuration.
Requires user role: ADMIN, USER
Value space of the result returned:
Failed/AuthenticationFailed/Provisioned/Idle/NeedConfig/ConfigError
Example:
xStatus Provisioning Status
*s Provisioning Status: Provisioned
** end
Proximity status
xStatus Proximity Services Availability
Shows whether proximity services are available on the endpoint.
Available: Proximity mode has been enabled with the command xConfiguration Proximity Mode
and one or more of the proximity services have been enabled with xConfiguration Proximity
Services commands.
Disabled: Proximity mode has been disabled with xConfiguration Proximity Mode, or none of the
services have been enabled with the xConfiguration Proximity Services commands.
Deactivated: Proximity services have been deactivated with the command xCommand Proximity
Services Deactivate.
Requires user role: ADMIN, USER
Example:
xStatus Proximity Services Availability
*s Proximity Services Availability: Disabled
** end
Introduction
About the API
xConfiguration
Appendices
xCommand
xSt atus

xSt atus