Cisco TelePresence DX70 - Xcommand Security Persistency; Xcommand Security Session List; Xcommand Security Session Terminate

D15363.05 Cisco TelePresence DX70 and DX80 API Reference Guide CE9.2, NOVEMBER 2017.
Copyright © 2017 Cisco Systems, Inc. All rights reserved. 122
Cisco TelePresence DX70 and DX80
API Reference Guide
xCommand Security Persistency
Set the following features to persistent or non-persistent mode. In non-persistent mode
the information gathered by the specified feature does not persist a reboot of the system.
Persistent mode is the default. This command reboots the system.
Requires user role: ADMIN
USAGE:
xCommand Security Persistency Configurations: Configurations CallHistory:
CallHistory InternalLogging: InternalLogging LocalPhonebook: LocalPhonebook
DHCP: DHCP ConfirmAndReboot: ConfirmAndRe bo ot
where
Configurations : NonPersistent/Persistent
In non-persistent mode, all configurations are set back to default when the system
reboots.
CallHistory : NonPersistent/Persistent
In non-persistent mode call history is deleted when the system reboots.
InternalLogging : NonPersistent/Persistent
In non-persistent mode eventlog is deleted when the system reboots.
LocalPhonebook : NonPersistent/Persistent
In non-persistent mode local phone book is deleted when the system reboots.
DHCP : NonPersistent/Persistent
In non-persistent mode all IP related information is deleted when the system reboots.
ConfirmAndReboot : Yes
Reboots the system.
xCommand Security Session List
List active sessions.
Requires user role: ADMIN, USER
USAGE:
xCommand Security Session List
xCommand Security Session Terminate
Terminate a session.
Requires user role: ADMIN, USER
USAGE:
xCommand Security Session Terminate SessionId: "SessionId"
where
SessionId : String (0, 32)
The session ID number.
Introduction
About the API
xConfiguration
Appendices
xCommand
xSt atus

xCommand