Cisco TelePresence DX70 - Xstatus Mediachannels Call [N] Channel [N] Netstat Channelrate; Xstatus Mediachannels Call [N] Channel [N] Netstat Jitter; Xstatus Mediachannels Call [N] Channel [N] Netstat Lastintervallost; Xstatus Mediachannels Call [N] Channel [N] Netstat Lastintervalreceived

D15363.05 Cisco TelePresence DX70 and DX80 API Reference Guide CE9.2, NOVEMBER 2017.
Copyright © 2017 Cisco Systems, Inc. All rights reserved. 165
Cisco TelePresence DX70 and DX80
API Reference Guide
xStatus MediaChannels Call [n] Channel [n] NetStat ChannelRate
Shows the bandwidth for audio, video or data on the incoming or outgoing channel.
Requires user role: ADMIN, USER
Value space of the result returned:
Integer
Example:
xStatus MediaChannels Call 27 Channel 327 NetStat ChannelRate
*s MediaChannels Call 27 Channel 327 NetStat ChannelRate: 128000
** end
xStatus MediaChannels Call [n] Channel [n] NetStat Jitter
Shows the jitter for audio, video or data at the present moment on the incoming or outgoing
channel, as specified by RFC 3550.
Requires user role: ADMIN, USER
Value space of the result returned:
Integer
Example:
xStatus MediaChannels Call 27 Channel 327 NetStat Jitter
*s MediaChannels Call 27 Channel 327 NetStat Jitter: 2
** end
xStatus MediaChannels Call [n] Channel [n] NetStat LastIntervalLost
Shows the number of packets lost for audio, video or data during the last interval on the incom-
ing or outgoing channels.
Requires user role: ADMIN, USER
Value space of the result returned:
Integer
Example:
xStatus MediaChannels Call 27 Channel 327 NetStat LastIntervalLost
*s MediaChannels Call 27 Channel 327 NetStat LastIntervalLost: 0
** end
xStatus MediaChannels Call [n] Channel [n] NetStat LastIntervalReceived
Shows the number of packets received for audio, video or data during the last interval on the
incoming or outgoing channels.
Requires user role: ADMIN, USER
Value space of the result returned:
Integer
Example:
xStatus MediaChannels Call 27 Channel 327 NetStat LastIntervalReceived
*s MediaChannels Call 27 Channel 327 NetStat LastIntervalReceived: 289
** end
xStatus MediaChannels Call [n] Channel [n] NetStat Loss
Shows the number of packets lost for audio, video or data on the incoming or outgoing
channels.
Requires user role: ADMIN, USER
Value space of the result returned:
Integer
Example:
xStatus MediaChannels Call 27 Channel 327 NetStat Loss
*s MediaChannels Call 27 Channel 327 NetStat Loss: 0
** end
xStatus MediaChannels Call [n] Channel [n] NetStat MaxJitter
Shows the maximum jitter for audio, video or data that has been measured during last interval
(about 5 seconds).
Requires user role: ADMIN, USER
Value space of the result returned:
Integer
Example:
xStatus MediaChannels Call 27 Channel 327 NetStat MaxJitter
*s MediaChannels Call 27 Channel 327 NetStat MaxJitter: 2
** end
Introduction
About the API
xConfiguration
Appendices
xCommand
xSt atus

xSt atus