EasyManuals Logo

Cisco TelePresence DX70 Reference Guide

Cisco TelePresence DX70
202 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #52 background imageLoading...
Page #52 background image
D15363.05 Cisco TelePresence DX70 and DX80 API Reference Guide CE9.2, NOVEMBER 2017.
Copyright © 2017 Cisco Systems, Inc. All rights reserved. 52
Cisco TelePresence DX70 and DX80
API Reference Guide
xConfiguration Network [1] IEEE8021X UseClientCertificate
Authentication using a private key/certificate pair during an IEEE802.1x connection. The authen-
tication X.509 certificate must be uploaded to the video system. This can be done from the
web interface.
Requires user role: ADMIN, USER
Default value: Off
USAGE:
xConfiguration Network n IEEE8021X UseClientCertificate: UseClientCer tificate
where
n
: Index that identifies the network. Range: 1..1
UseClientCertificate
: Off/On
Off: When set to Off client-side authentication is not used (only server-side).
On: When set to On the client (video system) will perform a mutual authentication TLS
handshake with the server.
xConfiguration Network [1] IEEE8021X Identity
Define the user name for 802.1X authentication.
Requires user role: ADMIN, USER
Default value: ""
USAGE:
xConfiguration Network n IEEE8021X Identity: "Identity"
where
n
: Index that identifies the network. Range: 1..1
Identity
: String (0, 64)
The user name for 802.1X authentication.
xConfiguration Network [1] IEEE8021X Password
Define the password for 802.1X authentication.
Requires user role: ADMIN, USER
Default value: ""
USAGE:
xConfiguration Network n IEEE8021X Password: "Password"
where
n
: Index that identifies the network. Range: 1..1
Password
: String (0, 50)
The password for 802.1X authentication.
xConfiguration Network [1] IEEE8021X AnonymousIdentity
The 802.1X Anonymous ID string is to be used as unencrypted identity with EAP (Extensible
Authentication Protocol) types that support different tunneled identity, like EAP-PEAP and
EAP-TTLS. If set, the anonymous ID will be used for the initial (unencrypted) EAP Identity
Request.
Requires user role: ADMIN, USER
Default value: ""
USAGE:
xConfiguration Network n IEEE8021X AnonymousIdentity: "Ano nymousIdentity"
where
n
: Index that identifies the network. Range: 1..1
AnonymousIdentity
: String (0, 64)
The 802.1X Anonymous ID string.
Introduction
About the API
xConfiguration
Appendices
xCommand
xSt atus

xConfiguration

Table of Contents

Other manuals for Cisco TelePresence DX70

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco TelePresence DX70 and is the answer not in the manual?

Cisco TelePresence DX70 Specifications

General IconGeneral
BrandCisco
ModelTelePresence DX70
CategoryConference System
LanguageEnglish

Related product manuals