Cisco TelePresence DX70 Reference Guide

D15363.05 Cisco TelePresence DX70 and DX80 API Reference Guide CE9.2, NOVEMBER 2017.
Copyright © 2017 Cisco Systems, Inc. All rights reserved. 181
Cisco TelePresence DX70 and DX80
API Reference Guide
xStatus SIP Proxy [n] Status
Shows the status of the communication between the endpoint and the SIP Proxy server.
Active: The communication between the endpoint and the SIP Proxy is active.
DNSFailed: The attempt to establish communication to the DNS server failed.
Off: There is no communication between the endpoint and the SIP Proxy.
Timeout: The attempt to establish communication to the SIP Proxy timed out.
UnableTCP: The system is unable to use TCP as the transport method.
UnableTLS: The system is unable to use TLS as the transport method.
Unknown: The status of the communication is not known.
AuthenticationFailed: Wrong user name or password.
Requires user role: ADMIN, USER
Value space of the result returned:
Active/DNSFailed/Off/Timeout/UnableTCP/UnableTLS/Unknown/AuthenticationFailed
Example:
xStatus SIP Proxy 1 Status
*s SIP Proxy 1 Status: Active
** end
xStatus SIP Registration [n] Authentication
Shows which authentication mechanism is used when registering to the SIP Proxy Server.
Digest: Uses the Digest access authentication method, as specified by RFC 2069.
NTLM: Uses the NTLM authentication method, which is a Microsoft authentication protocol.
Off: No authentication mechanism is used.
Requires user role: ADMIN, USER
Value space of the result returned:
Digest/Off
Example:
xStatus SIP Registration 1 Authentication
*s SIP Registration 1 Authentication: Off
** end
xStatus SIP Registration [n] Reason
Shows a message to explain the reason why the SIP registration failed.
Requires user role: ADMIN, USER
Value space of the result returned:
String
Example:
xStatus SIP Registration 1 Reason
*s SIP Registration 1 Reason: "404 Not Found"
** end
xStatus SIP Registration [n] Status
Shows the status of the registration to the SIP Proxy Server.
Deregister: The system is in the process of de-registering to the SIP Proxy.
Failed: The system failed to register to the SIP Proxy.
Inactive: The system is not registered to any SIP Proxy.
Registered: The system is registered to the SIP Proxy.
Registering: The system is in the process of registering to the SIP Proxy.
Requires user role: ADMIN, USER
Value space of the result returned:
Deregister/Failed/Inactive/Registered/Registering
Example:
xStatus SIP Registration 1 Status
*s SIP Registration 1 Status: Registered
** end
Introduction
About the API
xConfiguration
Appendices
xCommand
xSt atus

xSt atus

Cisco TelePresence DX70 Specifications

General

Brand	Cisco
Model	TelePresence DX70
Category	Conference System
Language	English